Inconel 601 alloy steel

Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200° F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.
Inconel 601 alloy similar material are: UNS N06601, W.Nr.2.4851, NiCr23Fe, Alloy 601

Inconel 601 alloy steel
Inconel 601 Nickel alloy steel Chemical Composition %

Ni Cr Al C Mn Si Fe
61.5 22.5 1.4 0.05 0.3 0.2 14

 

Kovar Nickel alloy steel

Kovar alloy is a vacuum melted, iron-nickel-cobalt, low expansion alloy whose chemical composition is controlled within narrow limits to assure precise uniform thermal expansion properties. Extensive quality controls are employed in the manufacture of this alloy to ensure uniform physical and mechanical properties for ease in deep drawing, stamping and machining.
Kovar Nickel alloy similar material are:UNS K94610
Kovar Nickel alloy usually used in the following industries :
Kovar alloy has been used for making hermetic seals with the harder Pyrex glasses and ceramic materials.
Kovar Nickel alloy steel has found wide application in power tubes, microwave tubes, transistors and diodes. In intergrated circuits, it has been used for the flat pack and the dual-in-line package.

Kovar Nickel alloy steel
Kovar Nickel alloy steel chemical composition :

C Mn Co Ni Si
Max Max Max Max Max
0.02 0.30 17.0 29.0 0.20

Kovar Nickel alloy steel Mechanical Property:

Yield
Strength
Tensile
Strength
% Elongation
in 2″
Hardness
Rockwell B
ksi MPa ksi MPa
50 345 75 517 30 68

Forging
The principal precaution to observe in forging is to heat quickly and avoid soaking in the furnace. Long soaking may result in a checked surface due to absorption of sulfur from the furnace atmosphere and/or oxide penetration. A forging temperature of 2000/2150°F is preferred.
Typical Mechanical Properties
Typical Mechanical Properties of Strip
Tested parallel to the direction of rolling. Material annealed 1830°F for 30 minutes, then furnaced cooled.
Kovar Product form and Specifications:

Sheet/Plate/Bar AMS5894
International Werkstoff Nr.1.3981/DIN 17745/AFNOR NF A 54-301/S.E.W.385

 

Hastelloy G35 Nickel alloy

SDJS Hastelloy G35 Hastelloy alloy is a kind of nickel base high temperature alloy composed of nickel, chromium, cobalt, tungsten and other elements, nickel content of about 37%.
Hastelloy G35 is a nickel based alloy is a high chromium content, it for commercial phosphoric acid and mixed environment many high oxidizing acid medium such as nitric acid / hydrochloric acid, nitric acid / hydrofluoric acid and sulphuric acid with resistance to corrosion than most other nickel base and iron base alloy is more outstanding. G30 alloy can prevent the welding heat affected zone of grain boundary precipitates formed welded, so its products are suitable for use in various chemical processing engineering
Hastelloy G35 Nickel alloy application :
Hastelloy G35 nickel alloy widely used in phosphoric acid equipment equipment, sulfuric acid, nitric acid equipment, nuclear fuel reprocessing, nuclear waste disposal, pickling, petrochemical products, production of chemical fertilizer, pesticide production, gold extraction. Hastelloy G35 Hastelloy alloys such as stainless steel pickling for applications such as hydrofluoric acid / nitric acid mixture has excellent resistance, compared with other nickel base and iron base alloy, Hastelloy alloy Hastelloy G35 showed better resistance in commercial phosphoric acid. It as grow with each passing day application of acid evaporators in fertilizer industry.

Hastelloy G35 Nickel alloy
Hastelloy G35 Nickel base alloy chemical composition :

 

 

Ni Cr Fe C Mn Si Mo Si Co V P S Cu W
Min balance 33.2 8.1 0.2
Max 2 0.05 1.0 1.0 1.0 5.0 0.4 0.035 0.03 2 0.6

Hastelloy G35 Nickel base alloy Product form and Specifications:

Product ASTM ASME
Alloy Sheet/Plate/Strip/Coil B575 SB575
Seamless alloy tube/Pipe B622 SB622
Welded alloy tube/pipe B619/B622 SB619/SB622
Ring/Bar/Rod B574 SB574
Forged product B564 SB564
Fittings/Flange B336 SB336

 

Hastelloy G-30 steel

Product : Hastelloy G-30

Hastelloy G-30 steel
Hastelloy G-30 Chemical composition :

Ni Cr Mo W Fe Cu C Nb
43 30 5 2.5 15 1.5 ≤0.03 ≤0.8

Hastelloy G-30 nickel steel Physical properties:

Density Tensile strength Rmn/mm2 Yield Strength Rp0.2N/mm2
8.22g/cm3 710 338

Hastelloy G-30 features: for sulfuric acid has good corrosion resistance, but also many mixed acid (such as nitric acid and hydrochloric acid) and other complex environment of strong oxidizing acids, than most other nickel-based alloy or iron-based specific alloys have better corrosion resistance.
Hastelloy G-30 alloy steel Application : used for industrial phosphoric acid, sulfuric acid industry, nitric acid industry and the nuclear industry. Equipment and parts petrochemical, fertilizer, pesticide production and gold refining and other fields.

Hastelloy G3 Nickel alloy

Hastelloy G3 Hastelloy alloy is a kind of nickel base high temperature alloy composed of nickel, chromium, cobalt, tungsten and other elements, nickel content of about 37%.
Hastelloy G3 is a nickel based alloy is a high chromium content, it for commercial phosphoric acid and mixed environment many high oxidizing acid medium such as nitric acid / hydrochloric acid, nitric acid / hydrofluoric acid and sulphuric acid with resistance to corrosion than most other nickel base and iron base alloy is more outstanding. G30 alloy can prevent the welding heat affected zone of grain boundary precipitates formed welded, so its products are suitable for use in various chemical processing engineering
Hastelloy G3 Nickel alloy similar material are : UNS N06030
Hastelloy G3 Nickel alloy application :
Hastelloy G3 Hastelloy alloy widely used in phosphoric acid equipment equipment, sulfuric acid, nitric acid equipment, nuclear fuel reprocessing, nuclear waste disposal, pickling, petrochemical products, production of chemical fertilizer, pesticide production, gold extraction. Hastelloy G3 Hastelloy alloys such as stainless steel pickling for applications such as hydrofluoric acid / nitric acid mixture has excellent resistance, compared with other nickel base and iron base alloy, Hastelloy alloy Hastelloy G3 showed better resistance in commercial phosphoric acid. It as grow with each passing day application of acid evaporators in fertilizer industry.

Hastelloy G3 Nickel alloy
Hastelloy G3 Nickel alloy chemical composition :

 

 

Ni Cr Fe C Mn Si Mo Si Co V P S Cu W
Min balance 22 7.00 0.2
Max 19.5 0.01 1.0 1.0 1.0 5.0 0.4 0.035 0.03 2.0 1.5W

Hastelloy G3 Product form and Specifications:

Product ASTM ASME
Alloy Sheet/Plate/Strip/Coil B575 SB575
Seamless alloy tube/Pipe B622 SB622
Welded alloy tube/pipe B619/B622 SB619/SB622
Ring/Bar/Rod B574 SB574
Forged product B564 SB564
Fittings/Flange B336 SB336

Hastelloy C-2000 alloy steel

Product : Hastelloy C-2000

Hastelloy C-2000 alloy steel
Hastelloy C-2000 Chemical composition :

C Cr V Fe Cu Mn Si P S Mo
0.01 23 0.35 3 ≤1.6 ≤0.5 ≤0.08 ≤0.02 0.08 16

Hastelloy C-2000 Physical properties

Density Melting point Hardness HRC
8.5g/cm3 1399℃ 90

Hastelloy C-2000 alloy steel Characteristics: corrosion resistance, including sulfuric acid, hydrochloric acid, hydrofluoric acid, phosphoric acid, an organic acid, alkali chloride, pitting, crevice corrosion, stress corrosion cracking.
Hastelloy C-2000 application : reactors, heat exchangers, valves, pumps, etc.

Hastelloy C276 alloy steel

Hastelloy C276 is a kindly of Nickel base anti-corrosion alloy with many excellent performance, good for oxidation and reduction of medium corrosion resistance ability. There are only several material has damp resistance Chlorine, hypochlorite and chlorine dioxide solution corrosion, Hastelloy C276 alloy is one of them.
Hastelloy C276 Nickel alloy similar material are:UNS N10276,DIN W.Nr.2.4819,NiMo16Cr15W
Hastelloy C276 Nickel alloy usually used in the following industries :
The nuclear power industry, chemical processing, pollution control
Pipe, evaporator transmission chemical, petroleum industry
Reactor of acetic acid and acidic products
The heat exchanger, the reaction kettle
Equipment and components operating in the acid gas in the environment
Sulfuric acid condenser.

Hastelloy C276 alloy steel
Hastelloy C276 Nickel base alloy chemical composition :

Ni Cr Fe C Mn Si Mo W Co V P S
minimum balance 15.0 4.0 15.0 3.0 0.1
maximum 16.5 7.0 0.01 1.0 0.08 17.0 4.5 2.5 0.3 0.015 0.01

Hastelloy C276 Nickel base alloy Mechanical Property:

Product Form θ/℃ Tensile Strength MPa Yield Strength Elongation δ5 /%
Tube/pipe 20 ≥727 ≥313 ≥70
Sheet/Plate 20 ≥741 ≥347 ≥67
Bar/Rod 20 ≥758 ≥363 ≥62
Strip/Coil 20 ≥796 ≥376 ≥60

Hastelloy C276 alloy melting point : 1325-1370 ℃
Hastelloy C276 Nickel density : 8.90 g/cm3
Hastelloy C276 alloy material hot working:
1 . The temperature range of thermal processing 1200 to 950 DEG C, is water cooling and rapid air cooling.
2 . In order to ensure the best performance of corrosion, heat processing should be performed after the heat treatment, the work should be added directly to heat treatment furnace heated.
Hastelloy C276 alloy material Cold working
1 . The work hardening rate is greater than the austenitic stainless steel, so it is necessary to processing equipment Selected. The work should be as solid solution heat treatment state, and should have the intermediate annealing during cold rolling.
2 . If the cold rolling deformation amount is greater than 15% to the workpiece, two solid solution treatment.
Hastelloy C276 alloy Heat treatment
1. Solid solution treatment temperature range is 1100 to 1160 DEG C.
The method of cooling water quenching, the thickness of less than 1.5mm material can also adopt the rapid air cooling. If the use of air cooling, it should be from 1000 DEG C, cooling to 600 DEG C in 2 minutes.
Hastelloy C276 Product form and Specifications:

Product ASTM ASME
Alloy Sheet/Plate/Strip/Coil B575 SB575
Seamless alloy tube/Pipe B622 SB622
Welded alloy tube/pipe B619/B622 SB619/SB622
Ring/Bar/Rod B574 SB574
Forged product B564 SB564
Fittings/Flange B336 SB336

Hastelloy C4 nickel-chromium-molybdenum alloy

Hastelloy C4 is a nickel-chromium-molybdenum alloy which has improved thermal stability. In this alloy, the tungsten was totally omitted and the iron content was reduced to approximately 1%. The alloy also contains approximately 0.3% Ti
Outstanding high-temperature stability exhibits good ductility and corrosion resistance after long-time aging at 650 to 1040 degree C . Resists formation of grain-boundary precipitates in weld heat-affected zones, and is suitable for most chemical process applications in the as-welded condition. Has excellent resistance to stress-corrosion cracking and to oxidizing atmospheres up to 1040 degree C
Hastelloy C4 alloy steel has exceptional resistance to a variety of chemical process environments, including hot contaminated mineral acids, solvents, chlorine, and chlorine-contaminated media (organic and inorganic, dry chlorine, formic and acetic acids, acetic anhydride, seawater, and brine).
Hastelloy C4 Nickel alloy similar material is : UNS N06445, W.NR.2.4610
Hastelloy C4 Nickel alloy application :
HastelloyC4 alloy is widely used in the field of energy production and pollution control, chemical, petrochemical, especially in the sulfuric acid, hydrochloric acid, phosphoric acid, acetic acid industry.

Hastelloy C4 nickel-chromium-molybdenum alloy
Hastelloy C4 Nickel base alloy chemical composition :

Ni Cr Mo Fe Ti Co C Mn Si P S
Min Balance 14.5 14
Max 17.5 17 3.0 0.7 2.0 0.009 1.0 0.05 0.025 0.010

Hastelloy C4 Nickel base alloy Mechanical Property:

Grade Density Melting point
Hastelloy C4 8.6g/cm3 1335°C-1380°C

Hastelloy C4 Nickel base alloy Mechanical Property :

Alloy state Tensile strength MPa Yield strength MPa elongation A5 %
Hastelloy C4 alloy bar 690 275 40
Hastelloy C4 alloy Hot rolled plate 690 275 40
Hastelloy C4 alloy colled rolled sheet 690 275 40
Hastelloy C4 alloy strip 690 275 40

Hastelloy C4 Product form and Specifications:

Product ASTM ASME
Alloy Sheet/Plate/Strip/Coil B575 SB575
Seamless alloy tube/Pipe B622 SB622
Welded alloy tube/pipe B619/B622 SB619/SB622
Ring/Bar/Rod B574 SB574
Forged product B564 SB564
Fittings/Flange B336 SB336

Hastelloy C alloy

Hastelloy C alloy contains a lot of Cr, Mo and other elements, and has a single phase austenite.
Corrosion resistant alloy has many excellent performance, good for oxidation and reduction of medium corrosion resistance ability.
Hastelloy C alloy has many excellent performance, good for oxidation and reduction of medium corrosion resistance ability.
Hastelloy C Has excellent resistance to stress corrosion cracking ability and good resistance to local clothing has corrosion resistance ability, satisfactory in many chemical process includes etching medium, strong inorganic acid solution, chlorine and various medium, dry chlorine gas, chloride containing formic acid and acetic acid, water and salt water
Hastelloy C Nickel alloy similar material is : NS3303
Hastelloy C Nickel alloy application :
HastelloyC alloy is widely used in the field of energy production and pollution control, chemical, petrochemical, especially in the sulfuric acid, hydrochloric acid, phosphoric acid, acetic acid industry.

Hastelloy C alloy steel
Hastelloy C Nickel base alloy chemical composition :

Ni Cr Mo Fe W Co C Mn Si V P S
Min Balance 14.5 15 4 3
Max 16.5 17 7 4.5 2.5 0.08 1 1 0.35 0.04 0.03

Hastelloy C Nickel base alloy Mechanical Property:

Alloy state Tensile strength MPa Yield strength MPa elongation A5 %
Hastelloy C alloy bar 690 315 30
Hastelloy C alloy Hot rolled plate 690 315 30
Hastelloy C alloy colled rolled sheet 690 285 40
Hastelloy C alloy strip 690 315 30

Hastelloy C Density: 8.94 g/cm3
Hastelloy C Melting point: 1350 degree
Hastelloy C Product form and Specifications:

Product ASTM ASME
Alloy Sheet/Plate/Strip/Coil B575 SB575
Seamless alloy tube/Pipe B622 SB622
Welded alloy tube/pipe B619/B622 SB619/SB622
Ring/Bar/Rod B574 SB574
Forged product B564 SB564
Fittings/Flange B336 SB336

Hastelloy B3 (N10675) steel

Hastelloy B3 (N10675) is a kind of nickel base high temperature alloy composition with nickel, molybdenum, cobalt and other elements, nickel content of about 65%. Hastelloy B3 (N10675) nickel based alloy material is a new material based on Hastelloy B2, improve the thermal stability of the materials, so as to improve the corrosion resistance, at the same time, improve the hot forming and cold forming performance. In recent years, production has been applied more and more in chemical equipment.
Hastelloy B3 Nickel alloy similar material are : UNS N10675, DIN W.Nr.2.4600, NS3203
Hastelloy B3 Nickel alloy application :
Alloy Hastelloy B3 is widely used in the field of energy production and pollution control, chemical, petrochemical, especially in the sulfuric acid, hydrochloric acid, phosphoric acid, acetic acid industry.

Hastelloy B3 (N10675) steel
Hastelloy B3 Nickel base alloy chemical composition :

Hastelloy B-3 Ni

Min

Mo

 

Cr

 

Fe

 

Co

max

Mn

max

W

max

Al

max

Ti

max

Si

max

C

max

% 65 28.5 1.5 1.5 3 3 3 0.5 0.2 0.1 0.01

Hastelloy B3 Nickel base alloy Mechanical Property:

Alloy and state Tensile strength

Rm N/mm2

Yield strength

RP0.2N/mm2

Elongation A5 %
Hastelloy B-3 690 310 40

Hastelloy B-3 Physical properties
Hastelloy B-3 alloy density: 2.1 to 9.22 g/cm3
Hastelloy B-3 Melting point: 1418 degree
Hastelloy B-3 Hardness: 2.5 HB94
>Hastelloy B-3 alloy Mechanical properties of the minimum 2.8
Hastelloy B3 Nickel base alloy Product form and Specifications:

Product ASTM ASME
Alloy Sheet/Plate/Strip/Coil B575 SB575
Seamless alloy tube/Pipe B622 SB622
Welded alloy tube/pipe B619/B622 SB619/SB622
Ring/Bar/Rod B574 SB574
Forged product B564 SB564
Fittings/Flange B336 SB336